Clem Completes 2025 - Presale

$2,400.00 USD

Sale Sold out

Shipping calculated at checkout.

Size 45cm 52cm 59cm

Color Bronzey Green Dark Gold

Quantity

Read this first: These preassembled complete bikes require a mechanic for the final assembly. If you're taking it to a bike shop, or you're confident you can do it yourself (the checklist is linked below), pick the "I'll arrange the final assembly" option on the dropdown menu above and we'll ship your bike pronto. If you want us to go over the bike and get it all ready to go, pick one of the other two options. Note though, that we'll ship the DIY bikes first, so if you need it quickly, go that route.

Here's the checklist.

A frame built into a complete here by Riv mechanics is at minimum $3,136 without a saddle or pedals, so you're still saving a ton of dough getting one of these complete bikes and having us do the final assembly.

------

Clem Smith Jr. is Rivendell’s fat-tire, easy to fender & rack, joyously upright and stable, and more affordable than the rest of our lineup bicycle frame. Clems cost less than our fully lugged models only because they come as complete bikes straight from Taiwan and the two head tube joints are tig-welded instead of lugged. Tigging cuts the construction time for each frame down by a lot so the price gets lower. They'd cost even less if we ditched the head tube ring, seat lug, and fork crown, but we can't limbo that low :). Clems are gorgeous bikes, with plenty of beautiful details you won't find on any other tig-welded bikes at any price, including:

• a gorgeous investment-cast fork crown, our own design

• investment-case "napkin-ring" head tube reinforcement rings, with cream-painted RBW and ovals

• an investment cast seat lug with the smartest, strongest binder bolt ears on any seat lug. It uses standard hardware store bolt (M6 x 22) and a 10mm hex nut. In a pinch, you can clamp it with a vise grip, or use almost any combination of bolt, washers, and nuts to close it. If you or the airlines manage to lose yours, every hardware store in THE WORLD will have either a perfect replacement or a workable solution.

These are made by the same people who make the more expensive frames and with the same materials even, so they ride as well as even our custom frames.

PBH ranges:

45cm - 68 to 81cm

52cm - 74 to 88cm

59cm - 86 to 96cm

Pick the frame size that your PBH falls most in the middle of the range.Since there's no standover issues, you can go bigger if you want:

A lot of our customers and some staff have found that oversizing the Clems makes for a more luxurious ride. If you want to try that, use the following formula to figure out if you can achieve your saddle height on a bigger frame:

MINIMUM SADDLE HEIGHT per FRAME SIZE = Seattube length + 13cm.

Measured from center of crank to top of saddle. It's simple, it works like this: Measure your PBH (pubic bone height) and subtract 11cm. That's a good saddle height for you. Subtract 13cm, and that's your maximum Clem frame size. It assumes a saddle without springs, a fairly normal saddle. Example: If your PBH is 85cm, your saddle height is probably 74cm, and 74-minus-13 is 61, so you could easily ride a 61. But since we dont make that size. You can ride a 59cm. OR even, easily, a 52cm. In general it feels great to ride the biggest frame you can fit, but CLEMs have plenty of handlebar-height adjustability, so a 52cm will feel great, too.

Is there room for customization?

Yes, there is. Have us do the final assembly (using the options in the dropdown menu above) and call us to go over what you'd like done. There may be an extra labor charge if what you want is a lot of work, but the assembly charge will cover the easy stuff. Our number is 800-345-3918.

Relevant specs:

Seatpost Dimensions — 26.8mm for 45cm and 52cm and 29.8mm for 59cm

Rear spacing - 135mm and QR wheels only.

Front derailer clamp size - 28.6 for the 45 and 52cm. 31.8 for the 59cm. Get a $34 Skeleton Key FD on our site. It's not a looker, but it works so, so well.

Max tire size - 2.3 inches for all sizes. You maybe be able to squeeze in bigger than that, but we're sticking with 2.3. That allows for a little wobble in the wheel (although you'd have to bash it into something pretty hard for that to happen) without tire-rub on the frame.

Complete Bikes

FSA Duron Headset
Shimano 118mm Cartridge BB
Rivendell Silver 38/24t Crank w/ chainguard for 45cm and 52cm and Silver 34/24 for 59cm and 64cm (If you'd like a bigger chainring, let us know)
Tektro 837AL V-Brakes
Tektro RS360 Levers
Our Silver hubs laced to Alex DM21 rims - handbuilt by St. Jump. Super nice wheels.
Gravelking SKs (slightly knobby?) 2.0 for the 59cm, and 2.1 for the 45 and 52cm
Silver2 thumbies
Microshift Marvo rear derailer - not the best looking, but it works great
Skeleton Key front derailer
11-34 cassette
Nitto Tallux Stem - 80mm for the 45cm, 100mm for the 52cm, and 110mm for the 59cm.
Nitto Billie Bars, our favorite upright handlebar.
Kalloy Seatpost — 26.8mm for 45cm and 52cm and 29.8mm for 59cm and 64cm
Comfy, basic plastic saddle also included
and imitation shorty ESI grips